Managed 8*100ge Opt and 48*10ge Opt Switch

• Customization: Available
• Communication Mode: Full-Duplex & Half-Duplex
• Type: Optical Switch
• Model NO.: F6E800XC-488
• Ports: ≧48
• Optical Port: 8*100ge Opt and 48*10ge Opt
• Management: Web, Snmp V1/V2/V3, Console, Telnet
• Working Temperature: -10 to +50 Degree Celsius
• Working Humidity: 10%~90%(No Condensation)
• Transport Package: Carton
• Trademark: Fibridge
• Origin: China
• Production Capacity: 20000PCS/Year

Product Description

Product Introduction

FIBRIDGE F6E800XC-488  series layer3 switch is a high-performance switch is built based on Ethernet switch IC CTC8180, support multiple ports. With CentecOS system software, F6-5800-E680 supports mainstream protocol standard and application program for convenient deployment and management.  The series applies localization self-controllable design solutions. The switch applies 1U19'' chassis, with fans for heat radiation.
The chassis applies AC 100-240V or DC -40--60V power supplies. Its working temperature is 0ºC~+45ºC, humidity is 10%~90%(no condensation).

Detailed Photos

Product Features

 

Support straight mode and storage-and-forward mode.
Support complete L2/L3 characters
Support NVGRE/ VXLAN/ GENEVE,Tunnel Routing & Bridging
Support STP/RSTP/MSTP/ELPS/ERPS/VRRP
Support VLAN, Por/MAC VLAN, QinQ
Support static configuration and dynamic learning, black hole MAC
Support static routing, RIP, OSPF, BGP, IS-IS, URPF, equal value routing
Support VRF,cross VRF ARP divulge
Support ICMP, ECMP, PIM;
Support LDP, VPWS, VPLS, L2VPN/L3VPN, MPLS;
Support QoS, flow management, speed rate limit;
Support PFC, DCBX
Support AAA,prevent DDos support RADIUS/TRCACS+, COPP;
Support port isolation, port security, IP+MAC+ port bunding
Support mirror analysis, Elephant Flow detection, burst flow/dynamic delay monitor and analysis
Support ACL;
Support iStack
Support IPv4/IPv6;
Support based on IEEE802.1X flow control
Support Web, SNMP, CLI, Telnet, SmartConfg management
Support NVGRE, VXLAN, GENEVE, SDN, EVPN, IPFIX;
Support LLDP;
Support link aggregation, cross device link aggregation
Based on port and based on MAC 802.1x certificate
Obtain network qualification certificate

 

Product Parameters

 

Network Characteristics
Ethernet Protocol	Support IEEE802.3/802.3u/802.3x/802.3Z/802.3AB storage and forward
Flow Control	IEEE802.3x flow control, back pressure flow control
Network Interface	Optical port: 1000MBase-FX, 10GBase-FX SM/MM SC/FC/SFP optional      25GE SFP28 port, 40GE QSFP+ port       100GE QSFP28 port Ethernet port: 10/100/1000MBase-T(X)auto adaptive Ethernet RJ45 port
VLAN	802.1Q standard VLAN
MAC Addresses	122K
Jumbo Frame	Max 9600Bytes
Cache	36MB
Packet Buffer	6.4Tbps
Packet Forwarding Rate	3 5 7 1.2 0 M p p s
Management	Web, SNMP V1/V2/V3, Console, Telnet
Optical Characteristics
Optical Interface	SFP+, QSFP
Fiber Core Count	Simplex/duplex
Wavelength	1310nm/1550nm(850nm)
Fiber Mode	SM/MM
Environmental Characteristics
Temperature & Humidity	Working temperature: 0ºC~50ºC Storage temperature: -20ºC~70ºC Working humidity:10%~90% RH No condensation Storage humidity:5%~95% RH No condensation
Power	AC 100-240V/50-60Hz embedded switch power DC-40--60V external power supply
MTBF	≥100000 hours
Hardware Configuration
Expanding sub-card	None
Serial port type	1 RJ45 type serial port
Out-band management port	1 RJ45 out-band management port
In-band management port	Support
USB port	1 standard USB port

 

Ordering Information

 

Model	Description	Dimension	Weight	Management
F6E800C-32	32 x 100GE QSFP28 port	4.4 x 4 4.2 x 4 7.1 c m	8.8 0 k g	WEB, SNMP, CLI
F6E800Q-24	24 x 40GE QSFP+ port	4.4 x 4 4.2 x 4 5.1 c m	8.8 5 k g	WEB, SNMP, CLI
F6E800XQ-486	48 x 10GE SFP+ port 6 x 40GE QSFP+ port	4.4 x 4 4.2 x 4 5.1 c m	8.85 kg	WEB, SNMP, CLI
F6E800YC-488	48 x 25GE SFP28 port 8 x 100GE QSFP28 port	4.4 x 44.2 x 45.1 cm	8.35 kg	WEB, SNMP, CLI
F6E800YC-244	24 x 25GE SFP28 port 4 x 100GE QSFP28 port	4.4 x 44.2 x 45.1 cm	8.35 kg	WEB, SNMP, CLI
F6E800XC-488	48 x 10GE SFP+ port 8 x 100GE QSFP28 port	4.4 x 44.2 x 45.1 cm	8.35 kg	WEB, SNMP, CLI